The straightforward Fault analysis and solution for hoverboard

Presently, players in purchasing electric hoverboard bluetooth experienced more trouble issue is motor failure, or balance system failure, usually supported by “drop” lengthy ring. Most customers think it is the motherboard, actually, very frequently there’s a cable connection isn’t good. Today tell customers instantly detects the exclusion of non-motor problems brought on by the motherboard, balanced failure fault.

Hall cable connection isn’t good or off, or fitting inside a number of finger contacts bad, this can result in failure. Using the alarm seem “tick” seem, and also the motor doesn’t work. Normally can link directly or through re-plug the Hall line interface, in order to resolve the row.

In which an electric power lines are bad or off, the motor power but could not walk, supported by great friction noise. Two lines from the motor or bad, completely from the motor doesn’t work.

Common problems would be the following:

  • The electrical hoverboard wheel has run out of balance, it’ll out have control so when you fully stand up.
  • One wheel doesnโ€™t work. Sore point flash.
  • The edges from the wheel doesn’t work. Sore point flash.

Now we come to check out the hoverboard brushless motor, that has two teams of cables, correspondingly, several three different colors from the bold lines are the ability line, some five different colors of thread, is really a Hall line.

A ๐Ÿ™ battery direction) motor power line it’s three different colored lines, anyone poor contact or disconnect , here the motor will forfeit balance, or time with abnormal seem. Poor contact or disconnect any two points, the motor won’t work here. Tip lights don’t flash.

B ๐Ÿ™ battery direction) line consists of Hall 5 different color thread metabolic rate. Anyone lines are bad or disconnected, leading to each side from the motors aren’t working. Tip lamp flashes 5 occasions each.

C: deputy board cable lines are the group of four different colored lines, poor contact or disconnection, the motor won’t focus on each side, running lights could work, cue lights exhibited each time.

D and F: with light cable isn’t good or disconnected with lamp doesn’t work.

E: Battery warning lamp isn’t good or even the cable is disconnected, battery light will prompt doesn’t work.

G: deputy board cable lines are the group of four different colored lines, poor contact or disconnection, the motor won’t focus on each side, running lights could work, and cue lights don’t flash.

H ๐Ÿ™ switching direction) Hall line consists of 5 different color thread metabolic rate. Anyone lines are bad or disconnected, leading to each side from the motors aren’t working. Tip 4 under lights flash each time.

I ๐Ÿ™ switching direction) Motor power cable with three lines in various colors, anyone bad or disconnected, the motor is going to be out of whack here, or driving when there’s abnormal seem. Poor contact or disconnect any two points, the motor won’t work here. The indicator light don’t flash.

J: charging port isn’t good or even the cable is disconnected, it won’t charge.

K: switch cable isn’t good or off, switch button will fail.

L: Indicator lamp isn’t good or even the cable is disconnected, the warning lamp doesn’t work.

More cable problem, simply re-plug the cable or change could be solved.

Tally Explanations: flash once: C partial failure flashes two times: No Flash 3 occasions: Motor short-circuit fault flash four occasions: H partial failure flash 5 occasions: B partial failure flashes 6 occasions: 7 occasions battery failure flash: Battery direction auxiliary circuit board failure, we have to switch the circuit board flash 8 occasions: switching direction auxiliary circuit board failure, you have to switch the circuit board.